Tuesday 29 March 2016

Before you submit an Octane support email/forum post....

Things to check prior to contacting support via the Octane forums, or email, regarding any of my Octane plugins....


Check the on-line documentation to see if your question is answered there -> https://docs.otoy.com/#

If you have any type of video card or Cuda error or problem:


1) Reboot
2) Install the latest Nvidia driver
3) Re-install Octane Standalone (any version) from the .exe installer (this will set the Nvidia driver time-outs)
4) Make sure you have not overclocked your card (use MSI Afterburner http://www.guru3d.com/files-details/msi-afterburner-beta-download.html for this)
5) Install and run GPU-Z (https://www.techpowerup.com/downloads/SysInfo/GPU-Z/) and check your GPU temperatures.  Make sure each of your rendering cards is providing valid metrics on the Sensors tab (if not, that card is faulty).

Cuda errors 999 and 719, are usually caused by a hardware problem.  If this happens, check to see if Octane Standalone also produces those errors - if it does, then  UNDERCLOCKING your card (as per step 4 above) can sometimes fix this.

When contacting support make sure you post :-
1) the Octane Log (or error dialog) showing the full error message
2) What Nvidia drivers you are using.  Refer to point 2) above....
3) If the error is in an Octane plugin, is Octane Standalone rendering OK?
4) List the specific card(s) you are using

Artifacts in renders:

1) Check the Kernel->Ray Epsilon.  Check the plugin manual at https://docs.otoy.com/# for the recommended settings.

If the issue is regarding noise in renders:

1) Reduce Imager->Hot Pixel (to remove fireflys)
2) Increase Kernel->Caustic Blur (to smooth out Specular and Glossy material highlight noise)
3) When using emitter geometry, use low polygon surfaces (such as a single polygon plane).  Avoid having emitters behind glass (ie. behind specular surfaces) - instead add an additional geometry emitter over the glass and set the opacity to 0 (so the light emits but the geometry is not visible).
4) Reduce Kernel->GI Clamp (Try 10.  Otoy recommend a GI Clamp of ~10-100x the inverse of the exposure)
5) If you have noise in dark areas this may be due to paths being terminated early, so reduce Kernel->Path Termination Power
6) If the light illuminating the scene has come through a specular (glass) material, using “pmc” rather than “pathtracing”.  In this situation you can also reduce “kernel”->”direct_light_importance” to give the light that has passed through the glass more priority.  Also, you can let more direct light through the glass by reducing the glass material’s opacity (from 1 to say 0.2).
7) If you have had to set your Imager->Exposure substantially higher than 1 (ie. 2 or greater), then there is not enough light in your scene, in which case increase the emitter and/or HDR power.

If the issue is regarding Displacement:

1) If using a Displacement map, remove any Bump or Normal maps.
2) If you use a Displacement "Amount" of 0, the object will not render
3) Octane assumes black pixels in the displacement map have 0 displacement.  If using a displacement map where 0 is a negative displacement (for example, a map generated from ZBrush), put a "Shift" of negative half the "Amount" (ie. if the Amount is 0.01, the Shift will be -0.005)
4) Large polygons with displacement will render artifacts if the displacement Amount is small.
5) Displacement mapping requires UV Projection surfaces.  It requires a displacement texturemap, and procedural textures and Octane nodes which modify the displacement texturemap will be ignored.  Similarly, the Displacement Texture Greyscale Image "Power", "Gamma" and "Invert" pins are ignored
6) Very large displacement "Amount" values may position vertices in an invalid position which may crash Octane.  So start with small (0.001) Amount values and increase from there.
7) Displacement will only work on surfaces which have been UV mapped (and have UV coordinates)
8) The Power, Gamma, Invert and Border Mode of the Image node used as the Displacement Texture will be ignored when determining the displaced surface
9) Displacement on very long, thin polygons will render with artifacts
10) Only UV Set 1 is support for Displacement image maps (ie. If Set 2 or 3 is specified, Set 1 will still be the UV set used).

15 comments:

  1. Will one standalone license work with Poser and Daz seperate plugins?

    ReplyDelete
  2. Yes, as long as you are using both Poser and DAZ on the same PC.

    ReplyDelete
  3. This comment has been removed by the author.

    ReplyDelete
  4. Hi
    I can't install octane render
    When i put folder in plugins in c4d r18 don't install and not see icone octane in program
    My laptop :Notebook - Intel Core i5 8265U, 8GB RAM, 4 GB NVIDIA GeForce MX130 Graphics

    Plaese help me

    ReplyDelete
  5. Hi
    I can't install octane render
    When i put folder in plugins in c4d r18 don't install and not see icone octane in program
    My laptop :Notebook - Intel Core i5 8265U, 8GB RAM, 4 GB NVIDIA GeForce MX130 Graphics

    Plaese help me

    ReplyDelete
    Replies
    1. Sorry, you will need to post your question at render.otoy.com for the C4D plugin.

      Delete
  6. This comment has been removed by the author.

    ReplyDelete
  7. Hi, may I ask when the 2020.2 version for DAZ will be released? I still can not use the denoise function in the current version. Thanks!

    ReplyDelete
  8. I saw the updated plugin for c4d was released half month already, how about DAZ?

    ReplyDelete
  9. the latest version is installed. I don't want to upgrade to the new Rhinoceros. And why don't you support Rhinoceros 5?

    ReplyDelete
  10. the latest version is installed. I don't want to upgrade to the new Rhinoceros. And why don't you support Rhinoceros 5?

    ReplyDelete
  11. hello i bought myself a 3080 video card and it is not seen by Rhinoceros 5 plugin Octane 2018.1.3 what do i need to do?

    ReplyDelete
  12. Hello, I bought myself a 3080 graphics card and it can't be seen by the Rhinoceros 5 plugin Octane 2018.1.3. What do I need to do? Standelon has the latest version. I don't want to upgrade to the new Rhinoceros. And why don't you support Rhinoceros 5?

    ReplyDelete
    Replies
    1. Hi - for the 3080 graphics card, you will need Octane 2020.1.5 or later, which will require Rhino6 or Rhino7. There is no Octane 2020.1.5 plugin for Rhino5 - sorry.

      Delete